SCROLL ALL THE WAY TO THE BOTTOM OF THIS PAGE TO SEE EVERYTHING WE HAVE TO OFFER

NEW TEAR DROP BILLET SEAT MEDALLIONS
Our Seat Medallions have a modular design that allows them to be kustomized in an infinite number of ways. The center oval insert comes polished, but these little things are meant to be kustomized! The center inserts look great covered in contrasting colors or materials. These are 1.125" x 2.75"

$32.00
EACH

BILLET SEAT MEDALLIONS
Our Billet Seat Medallions have a modular design that allow them to be kustomized in an infinite number of ways. The center insert comes polished, but these little things are meant to be kustomized! The center inserts look great covered in contrasting colors or materials, or paint them to match your vehicle.
CLICK HERE FOR MORE INFO AND PICTURES

$30.00
EACH

BILLET KNOBS
Our knobs work great for headlight knobs, windshield wiper knobs, A/C control knobs, switch extensions, etc. They have a 1/4" hole in them, and attach with a set screw. They are 1.5" tall.
CLICK HERE FOR LARGER PICTURE

CHROME DOME LIGHT
Our plastic oval lights are easy to clean and require no polishing. Includes bulb, bulb socket, and wire leads. Wires into your headlight dimmer switch, door switches, or separate on/off switch very easily. Requires a 1 ¼” hole to be drilled for mounting. The lens is easily removable for bulb replacement. Measures 3.75" x 1.5".
NOW WITH REINFORCED WIRING !!!
CLICK HERE FOR MORE PICTURES

$15.00
EACH
BILLET INTERIOR DOOR HANDLES
Our interior door handles matches the shape of our tear drop A/C vents. The outer portion of the door handle bezel is polished, and the inside portion of the bezel is sandblasted to match our A/C vents. Don't forget the install kit!

PERFORATED ALUMINUM (OVAL HOLES)
This perforated aluminum follows the oval trend in modern hot rod interiors.
We now sell this perforated aluminum in smaller sheets that are
18" x 30" x 0.032". Works great for custom speaker grilles and vents.

$70.00 PER
SHEET

PERFORATED ALUMINUM (ROUND HOLES)
This perforated aluminum will give your interior a modern look. This stuff works great for custom speaker grilles or dash vents. Leave it brush finished or polish it for a high-shine look. We now sell this perforated aluminum in smaller sheets that are 16" x 30" x 0.050". It is fairly rigid, but can be bent/curved.

$65.00 PER
SHEET

WOVEN ALUMINUM MESH
Use it just like the perforated aluminum above. Comes in a sheet measuring 48" x 24". This woven mesh is alot more flexible than the perforated aluminum. It ships rolled up and packed in a box.

$90.00 PER
SHEET

NEW PERFORATED ALUMINUM (SLOTS)
This slotted aluminum has a longer, more linear look than our other styles of perforated aluminum. Comes in sheets that are 18" x 30" x 0.040".

$65.00 PER
SHEET

BILLET ALUMINUM DOOR PULLS
THESE WILL BE OUT OF STOCK UNTIL LATE FEBRUARY! SORRY!
These door pulls are designed to be inserted into an arm rest. They come with an aluminum insert that can be upholstered to match the interior of your car (shown upholstered). Comes with hardware and a steel bracket to fasten them to your door panel.
 CLICK HERE FOR MORE PICTURES

$80.00
PAIR
STAINLESS STEEL DROP IN CUPHOLDERS
Need something to hold your drink on those long trips? These stainless cupholders will do the trick, and look good at the same time! Put them in your center console or arm rests and you are good to go! Jumbo size has a diameter of 3.4375" and is 2" deep, and the Regular size has a diameter of 2.624" and is 2" deep.

BILLET ALUMINUM GRAB HANDLES
Do you need a way to pull your door shut? Our billet grab handle will get the job done, and will look good while doing it! These come polished, and are 7" long, 1/2" wide, and 1" tall.
 CLICK HERE FOR MORE INFO & PICTURES

CHROME PLATED E-BRAKE TRIM RING
These chrome plated trim rings look alot better than your average flat shifter boot trim rings. Measures 8" x 3.5", and is 0.75" wide. Please note that these trim rings are plastic. The chrome plating process is the same as the chrome plated plastic grilles used on production cars, so it is a quality, durable finish.
CLICK HERE FOR MORE PICTURES

$15.00
EACH

CHROME PLATED SHIFTER TRIM RING
These chrome plated trim rings look alot better than your average flat shifter boot trim rings. Measures 5.75" in diameter, and is 0.75" wide. Please note that these trim rings are plastic. The chrome plating process is the same as the chrome plated plastic grilles used on production cars, so it is a quality, durable finish.
CLICK HERE FOR MORE PICTURES

$15.00
EACH

FLOOR MOUNT ARM REST
Do you need an arm rest inbetween your seats, but just don't have room for a center console? If so, then the floor mount arm rest from Krist Kustoms is your answer! This sleek arm rest mounts to the floor of your car inbetween the seats. The design allows it to be used when the seats are practically touching! Two colors, black and silver, and two sizes, 15" or 18" are available.
CLICK HERE FOR MORE PICTURES

$80.00

Limited quantities left.

Please call to order.

ALUMAMAT
Very similar to Dynamat, but alot more cost effective. This aluminum faced, self adhesive sound and heat insulation will keep you cool and quiet. Comes in 100 square foot rolls that are 36" wide.

$220.00
PER ROLL
ADJUSTABLE SEAT RISER
Need a little more heighth out of your seats? Our adjustable seat risers should do the trick. They measure 12" long, 2.5" tall when collapsed, 4" tall when extended, and the mounting holes measure 11" apart.

Change the quantity in the shopping cart to "2" if you need seat risers for a pair of bucket seats.

$50.00
PER SEAT

HIDDEN POWERED ANTENNA
This powered antenna can be hidden under the dash, on top of your headliner board, in the trunk, just about anywhere you can imagine. They get great reception too!

$40.00
NARROW 6-WAY POWER SEAT SLIDER
Put some luxury in your street rod. This universal unit travels front, back, up, down, and tilts front or back. It has 7" of travel front to back, measures 3.75" tall when collapsed, 5.5" tall when extended, is 10.8" wide, and 17.1" long.

$350.00
PER SEAT

BRUSHING
Use this brushing in holes or slots in your upholstery panels. Works great for shifters and trunk hinges that pass through a slot in an interior panel. Brushing comes in 36" long sections, is available with 2" or 4" bristles, and includes an aluminum holder that can be drilled for mounting purposes.

StreamLine Build-A-Seat Foam Kit
This is the same foam profile we use in our StreamLine Hot Rod Seats. This foam is great for building custom seats, or if you have our StreamLine Seats and need to build a kustom back seat, this foam will make the job alot easier and it matches our StreamLine Seats perfectly. This foam is CNC cut for a perfect profile, something you cannot achieve hand-cutting kustom seats. It will take ALOT of time out of kustom seat building, and we all know time is money!
CLICK HERE FOR LARGER PICTURES

$350.00
55" Wide